vermona '14 analogsynthesizer monophonic lead and bass synthesizer price : $2,299.00

with the completion of the '14 analogsynthesizer, a long fostered dream becomes true: the design and realization of an uncompromising synthesizer for instrumentalists.

equality of haptics and sound
to us, expressive play means a balanced relation between melodic virtuosity and sound shaping. in our '14 analogsynthesizer, these factors unite in full equality: keyboard, pitch- and modulation-wheels are incomplete without the additional controls and switches of the remaining control surface. these offer direct access to each individual sound shaping parameter of the synthesis engine.

the '14 analogsynthesizer is perfectly suited for distinctive solo and bass sounds including dynamic and individual sonic variations which are completely under your control at any time.

uncompromising circuit implementation
the components being responsible for the sound-generation and -shaping are based upon our proved and tested circuits of perfourmer mkii and mono lancet '15. however, we did not just carry over these circuits but have adapted and refined these specifically for the '14 analogsynthesizer. besides stability and musicality, we paid great attention to an intuitive and practical scaling of each and every sound parameter.

the '14 analogsynthesizer follows the classic subtractive synthesis structure: a versatile lowpass molds the sound-source being created by two powerful analog oscillators. typical for vermona instruments, the sound is warm, round, classy and offers musical authority in the mix.

handmade in our electroacoustic manufacture in germany
there a hundreds of work steps from the assembly of the circuit boards to the final, rigorous quality assurance of the finished instrument. without exception, these steps are carried out with skilled craftsmanship and expert precision in our elektroakustische manufaktur in erlbach, germany.

each '14 analogsynthesizer is an outstanding instrument and leaves our manufacture as one of just 222 units.



specifications:
vco 1
octaves: 16', 8', 4', fix
tune coarse: ± one octave
tune fine: ± ½ note
waveforms: sine, saw, rectangle
pulse-width: can be set manually between 50 % and 95 %
eg 1 intensity: about ± 2 ½ octaves
sub-oscillator: sine, one octave below main oscillator

vco 2
octaves: 16', 8', 4', fix
tune coarse: ± one octave
tune fine: ± ½ note
waveforms: sine, saw, rectangle
pulse-width: can be set manually between 50 % and 95 %
eg 1 intensity: about ± 2 ½ octavesv sub-oscillator: square, one octave below main oscillator
frequency modulation through lfo and sine-wave of vco 1
hard-sync through vco 2
vco 1 and vco 2
master tune: about ± ½ note
glide with legato function
pulse-width-modulation through lfo (up to 100% pulse-width)

mixer
volumes of both oscillators and sub-oscillators can be controlled individually
noise generator (white noise)
volume control for external input

filter
type: lowpass with resonance
slope: 12, 18, oder 24 db/octave
tracking: off, half (50%), full (100%)
modulation sources: lfo, eg 1, sinus-wellenform of vco 1 (can additionally be controlled by eg 1)

vca
modes: on, eg 2, eg 2 + lfo
individual volume controls for main outputs and headphone outputs

envelope generators eg 1 und eg 2
type: adsr
attack: 1 millisecond to 10 seconds
decay: 1 millisecond to 10 seconds
release: 1 millisecond to 10 seconds
legato mode can be switched on/off per envelope generator

lfo
waveforms:
saw up
saw down
square
triangle
sine
sample & hold

frequency range: 0.05 hz (= 20 seconds) to 100 hz
can be synchronized to internal or external clock
reset function

vibrato generator
waveforms: sinus or dreieck
frequency range: 0.05 hz (= 20 seconds) bis 100 hz
modulation destinations: vco 1, vco 2, vco 1 and vco 2
modulation intensity can be controlled by aftertouch and/or modulation wheel

vcf mod
modulation destinations:
cutoff-frequency
filter-fm-intensity through sine waveform of vco 1
modulation intensity can be controlled by aftertouch and/or modulation wheel

keyboards
44 keys, half-weight (fatar)
aftertouch
velocity for controlling cutoff-frequency and/or vca modulation through eg 2

pitchbender
can be adjusted freely between ± ½ note up to ± 1 octave
modulation destinations: vco 1, vco 2, vco 1 and vco 2

arpeggiator
modes:
arp (classic arpeggiator mode), seq (complete arpeggios can be stored)
up to 60 notes with velocity
arpeggios can include rests between notes
same notes can be used more often (with help of sustain-pedal)
variable gate length: 20 %, 50 %, 80 %, 100 % (legato), random values between 20 % and 80 %, random values between 20 % and 100 % (legato)

pattern:
up (1, 2 and 3 octaves)
down (1, 2 and 3 octaves)
up & down (1, 2 and 3 octaves)
alternate up
alternate down
zufall (1, 2 and 3 octaves)
order forward
order backward
can be triggered by lfo, internal or external clock

connections
audio outputs:headphones (⅛" - und ¼"- jack)
unbalanced ¼" - jack (line)
transformer-balanced xlr output (line)

audio input, &frac18" - jack
cv/gate outputs (¼" - and ⅛" - trs jacks)
gate out
modulation wheel
1v/octave
pitchbender

sustain pedal inputs, ¼" - jack
volume pedal, ¼" - jack with trim-pot for minimum volume
midi connections: in, out, thru

midi
send: keyboard, polyphon, arpeggiator, midi-control-changes for controlling mono lancet and mono lancet '15 parameters
receive: midi notes

dimensions and weight
dimensions: about 77 cm x 31 cm x 15 cm (width x depth x height)
weight: 6,5 kg

scope of delivery
'14 analogsynthesizer
sustain-pedal
printed manual
certificate
dust cover
microfiber cloth

limited to 222 units