doepfer a-176 control voltage source price : $80.00

module a-176 (control voltage source) provides three voltage sources, to use wherever an extra cv is required. the top two voltage sources (cv 1 and cv 2) have controls for coarse and fine control of the voltage output; the third source (cv 3) just has the one control.

the range of the voltages output can be preset, either to 0 to +5 v or to -2.5 v to +2.5 v depending on your likely requirements. there is a jumper on the circuit board for each of the three voltage sources.

a typical use for the module would be to provide fine as well as coarse tuning for an a-110 standard vco, (which, unlike the a-111, only has one tune control).

in general, this module will be useful whenever you need a manually controllable cv on a module which doesn't itself have a built-in control.

this module has a maximum current draw of 20ma. it requires 8 te/hp worth of space to fit in a eurorack frame.

to view this module's user manual as a pdf file, please click here.

please click here to visit the manufacturer's webpage for more info.