10-pin to 16-pin ribbon cable
price : $6.00
this is a 10-pin to 16-pin ribbon cable with red line indicator. it can be used for diy projects or to replace lost ribbon cables for doepfer a-100 modules. make sure that the module in question uses only
10-pins on the pcb side (such as the a-102, a-103, a-127, a-128, a-150, a-151 and others). most modules in the a-100 system use a 10-pin connector, especially those that don't use the internal a-100 cv/gate bus. careful to install the red line at -12v at each connection.
these cables were manufactured by doepfer. they are the exact same cables that ship with a-100 modules.