cwejman adsr-vc2 price : $585.00

both envelope generators are identical and provide control voltages that can be used for dynamic change of all voltage controlled parameters, such as frequency, amplitude, pulse width and cutoff. the most common use is controlling a filter's cutoff frequency and a voltage-controlled amplifier's amplitude in order to achieve dynamic timbre and level changes. all parameters such as attack time, decay time, sustain level, release time and output level are voltage-controlled.

specifications:
attack time - 0.1 msec to 10 seconds
decay time - 0.5 msec to 20 seconds
sustain level - 0 to 8 volts
release time - 0.5 msec to 20 seconds
attack mode - log/exp
outputs - 0 to 8 volts, normal; 0 to 8 volts, inverted
level cv - 0 to 5 volts
time cv - 0 to 5 volts
sustain cv - 0 to 5 volts
gate/trig - 2 volts threshold, any waveform
gate2 - pre-patched to gate 1 input
trig 2 - pre-patched to trig 1 input
current consumption - 30ma
dimensions - 128.4 mm (h), 101 mm (b); 3 he, 20 te

the cwejman adsr-vc2 can run off the doepfer a-100 internal bus, enabled via a jumper on the back of the module.

this module has a maximum current draw of 30ma. it requires 20 hp/te worth of space to fit in a eurorack frame.

for graphic waveform charts please view this pdf file.

please click here to visit the manufacturer's webpage for more info.